コンテンツへスキップ
ホーム / 製品 / Yrvenok Black Hybrid Air Hose
Hose Accessories

Yrvenok Black Hybrid Air Hose

Black Hybrid Air Hose series. Catalogue size options are shown below; specify the required size in your enquiry.

Working Pressure 2 / 300 MPa/PSI
Burst Pressure 8 / 1200 MPa/PSI

仕様

Black Hybrid Air Hose series. Catalogue size options are shown below; specify the required size in your enquiry.

This model is listed in the BLACK HYBRID AIR HOSE section of the supplied catalogue.

Model specifications

Working Pressure2 / 300 MPa/PSI
Burst Pressure8 / 1200 MPa/PSI

Catalogue configuration table

These are catalogue rows for this hose series, not newly created SKUs. Quote both the series name and configuration code; a code can be reused in another material series.

Factory configuration codeInner diameterOuter diameterWorking pressureBurst pressure
FDHA-1/46 mm13 mm2 / 300 MPa/PSI8 / 1200 MPa/PSI
FDHA-5/167.5 mm14 mm2 / 300 MPa/PSI8 / 1200 MPa/PSI
FDHA-3/89 mm15.5 mm2 / 300 MPa/PSI8 / 1200 MPa/PSI

Before choosing this model

For a size comparison, use the series name together with the factory configuration code and both inner and outer diameters. State the required hose length and connection requirements; these are not selected by the series listing.

The burst-pressure value is not a working-pressure rating. Do not use it as an operating limit.

Catalogue questions

Is the burst-pressure figure a working-pressure rating?

No. The source labels 8 / 1200 MPa/PSI as Burst Pressure, not a working-pressure rating.

Specifications and configuration rows are transcribed from the supplied product catalogue and have not been independently tested. Catalogue packing and container quantities are not MOQ, available inventory or a delivery promise.

特長

✓ 2 / 300 MPa/PSI
✓ 8 / 1200 MPa/PSI

推奨用途

  • ✓ パティオ、中庭、芝生、レイズドベッド散水のお問い合わせ
  • ✓ Outdoor cleaning and washdown route planning
  • ✓ Workshop air-line, pneumatic tool, and maintenance-bay planning
  • ✓ Spray gun, nozzle, connector, packaging, and display matching
  • ✓ OEM/ODM packaging and branding review

Service and Product Information

Quotation and order terms

Quotation
製品とサンプル発注はご要件に応じて個別に見積します。
Order quantity
発注は通常 1,000 台以上です。選定型番とカスタマイズ要件の数量をご確認ください。
Production
貨物は通常およそ 35–45 暦日で準備完了します。日程とその開始条件は各正式見積に記載されます。輸送時間は別です。
Payment
70% の前金が必要です。残りの 30% は出荷前に全額支払う必要があります。
Samples
サンプルは個別見積で有償です。サンプル費用は各正式見積の指定どおり発注代金に充当されます。対象となる発注、型番と数量の範囲、充当時期、送料の扱いは各正式見積に記載されます。

Review the terms and quotation conditions

スペアパーツ

スペアパーツ、適合部品、交換サポートは連絡窓口からお尋ねください。

スペアパーツの詳細は RFQ 窓口で協議できます。

製品問い合わせを送る

問い合わせリスト: