Przejdź do treści
Strona główna / Produkty / Yrvenok Garden Hose 01
Hose Accessories

Yrvenok Garden Hose 01

Garden Hose 01 series. Catalogue size options are shown below; specify the required size in your enquiry.

Working Pressure 1 / 150 MPa/PSI
Burst Pressure 3 / 450 MPa/PSI

Specyfikacja

Garden Hose 01 series. Catalogue size options are shown below; specify the required size in your enquiry.

This model is listed in the GARDEN HOSE 01 section of the supplied catalogue.

Model specifications

Working Pressure1 / 150 MPa/PSI
Burst Pressure3 / 450 MPa/PSI

Catalogue configuration table

These are catalogue rows for this hose series, not newly created SKUs. Quote both the series name and configuration code; a code can be reused in another material series.

Factory configuration codeInner diameterOuter diameterWorking pressureBurst pressure
FDPW-1/211 mm15 mm1 / 150 MPa/PSI3 / 450 MPa/PSI
FDPW-5/168 mm12 mm1 / 150 MPa/PSI3 / 450 MPa/PSI
FDPW-5/813.5 mm18 mm1 / 150 MPa/PSI3 / 450 MPa/PSI

Before choosing this model

For a size comparison, use the series name together with the factory configuration code and both inner and outer diameters. State the required hose length and connection requirements; these are not selected by the series listing.

The burst-pressure value is not a working-pressure rating. Do not use it as an operating limit.

Catalogue questions

Is the burst-pressure figure a working-pressure rating?

No. The source labels 3 / 450 MPa/PSI as Burst Pressure, not a working-pressure rating.

Specifications and configuration rows are transcribed from the supplied product catalogue and have not been independently tested. Catalogue packing and container quantities are not MOQ, available inventory or a delivery promise.

Cechy

✓ 1 / 150 MPa/PSI
✓ 3 / 450 MPa/PSI

Zalecane zastosowania

  • ✓ Zapytania o podlewanie patio, dziedzińca, trawnika i podwyższonych rabat
  • ✓ Outdoor cleaning and washdown route planning
  • ✓ Workshop air-line, pneumatic tool, and maintenance-bay planning
  • ✓ Spray gun, nozzle, connector, packaging, and display matching
  • ✓ OEM/ODM packaging and branding review

Service and Product Information

Quotation and order terms

Quotation
Produkty i zamówienia próbek wyceniane są indywidualnie według Twoich wymagań.
Order quantity
Zamówienia zwykle obejmują 1,000 sztuk lub więcej. Potwierdź ilość dla wybranych modeli i wymagań personalizacji.
Production
Towar jest zwykle gotowy w około 35–45 dniach kalendarzowych. Harmonogram i warunki jego rozpoczęcia podane są w każdej formalnej ofercie; czas tranzytu wysyłki jest osobny.
Payment
Wymagana jest zaliczka 70%. Pozostałe 30% musi być zapłacone w całości przed wysyłką.
Samples
Próbki wyceniane są indywidualnie i są płatne. Opłata za próbkę jest zaliczana na poczet płatności za zamówienie zgodnie z każdą formalną ofertą. Kwalifikujące się zamówienie, zakres modelu i ilości, moment zaliczenia oraz traktowanie kosztów wysyłki określane są w każdej formalnej ofercie.

Review the terms and quotation conditions

Części zamienne

Skorzystaj ze ścieżki kontaktu, aby zapytać o części zamienne, pasujące elementy lub wsparcie wymiany.

Szczegóły części zamiennych można omówić ścieżką RFQ.

Wyślij zapytanie o produkt

Lista zapytań: